HY CHEMICAL (KUNSHAN) Co.,LTD
Dispersant 110
Used as a wetting and dispersing agent for solvent-based and solvent-free paint and printing inks, stabilizing inorganic pigments, especially titanium dioxide. It can significantly reduce the viscosity of grinding materials.
This additive induces pigment deflocculation through steric hindrance. As the deflocculated pigment particles are very small, a high gloss and enhanced color intensity can be achieved. Additionally, this additive enhances the whiteness and covering power of pigments, especially titanium dioxide. Due to its anionic characteristics, this dispersant is an ideal choice for acid-catalyzed systems, such as coil coatings.
Features：
Special Note: Due to the high acid value of the product, it may catalyze the crosslinking of baking systems. Viscosity increase during the storage of the coating system should be checked.
Product information：
Chemical composition：
Polyphosphoric ester solution
Physical and chemical data table:
|
Appearance
|
Yellow transparent liquid
|
|
Effective active ingredient
|
50%
|
|
PH value
|
6-8
|
|
Viscosity cps 25℃
|
35
|
|
Solvent
|
Propylene glycol methyl ether acetate / alkyl benzene 1/1
|
|
Flash point
|
42℃
|
Recommendation formulation:
|
Titanium dioxide
|
2-4%
|
|
Inorganic pigments
|
5-10%
|
Transportation and Storage:
When stored or transported below 0°C, layering or turbidity may occur. Heat and stir before use. Transport as non-hazardous goods. 50KG/200KG/drum.
